High Purity Without Impurities: The graphite content of Taeantech high-purity graphite mold is as high as 99.99% or more, and the content of impurities (such as silicon, iron, calcium, etc.) is extremely low, ensuring that the gold and silver bars will not be contaminated during the casting process, thereby ensuring the purity and quality of the gold and silver bars.
Uniform Thermal Conductivity: The graphite mold has extremely high thermal conductivity and can quickly and evenly conduct heat to ensure that the temperature distribution of gold and silver bars is consistent during the casting process, avoiding deformation or cracks caused by local overheating or uneven cooling.
Cost Saving: Taeantech high-purity graphite mold can still maintain structural stability at high temperatures (for example, above 1700°C), is not easy to break or deform, and is suitable for long-term high-temperature casting. This thermal stability can reduce the loss of the mold, extend its service life, and reduce production costs.
Lubricity: High-purity graphite molds have natural self-lubricity and a low friction coefficient. Gold and silver bars are not easy to stick or scratch when demolding, ensuring a smooth surface of the finished product. The low friction coefficient reduces the wear between the mold and the gold and silver bars, further extending the service life of the mold.
Environmental Protection: Graphite itself is non-toxic and harmless. No harmful substances will be produced during the melting and casting process of gold bars, which meets environmental protection requirements. The used graphite mold can be removed through high-temperature treatment to achieve reuse and reduce resource waste.
Yes — the set is a two-piece high-purity graphite mold built around casting 1kg gold bars, supplied as the 2Pcs1kg configuration. The two halves open and close around the bar cavity, so you load, cast and demold one bar at a time. Check the cavity shape and the mold's outside footprint against your holder before ordering, and tell us if you need more than one cavity per mold.
It fits both — the mold is built for vacuum casting machine and gold melting machine setups, so a vacuum gold bar casting machine with 1kg molds and a melting-only station can share one set. Run it under vacuum whenever you can: that is where oxidation is held back and your bar comes out clean. Without vacuum you lose that protection, so skim the melt and keep the pour clean. Measure your chamber clearance before fitting it.
Yes. The mold operates effectively under vacuum, and that is where it earns its keep: with air pulled out of the chamber, oxidation during melting and casting drops and the bar face stays bright instead of scaling. Hold vacuum through the pour, because breaking it early defeats the point. The graphite is built for repeated heating cycles, so keep your cycle rhythm steady and you get consistent bars run after run.
It does. The two-piece build is what makes the mold quick to open, strip and reset between bars, so your operator spends time casting rather than fighting the tooling. On a vacuum gold bar casting machine that reset time is what sets your throughput, not the melt. Keep the mating faces clean and store the halves flat so they keep closing squarely; a burr or a ding on the face shows up as a seam on the bar.
High-purity graphite is the reason the mold can run without contaminating the melt, and it is what holds each bar to a uniform shape and weight. Graphite is consumable, though: the cavity face wears and oxidizes with every hot cycle. Watch the bar surface for pitting or a dull finish, and retire the mold once the face stops giving you a clean release. Ask us for the graphite grade when your own purity control needs the number.
One year from the date of purchase, free. As the vacuum gold casting machine manufacturer, we back it with one-on-one teaching guidance from our engineers, so if a bar comes out with a seam or a short fill, you have someone to walk the cycle through with you. Keep your purchase date handy for a claim, and treat the mold as the consumable it is — wear on the cavity face is working life, not a fault.